Tyco Electronics' Bi-Directional, Silicon-Based ESD Protection Devices Help Reduce Assembly Challenges
Poster: SySAdmin
Posted on February 2, 2011 at 12:28:01 PM
Tyco Electronics' Bi-Directional, Silicon-Based ESD Protection Devices Help Reduce Assembly Challenges
ChipSESD protection devices in standard 0201 and 0402 packages
MENLO PARK, Calif., Feb. 2, 2011 /PRNewswire/ -- Tyco Electronics (TE) has announced the expansion of its silicon ESD (electrostatic discharge) protection product portfolio with the introduction of 0201- and 0402-size devices that are easier to install and rework than traditional semiconductor-packaged ESD devices. The ChipSESD package combines the advantages of an active silicon device with a traditional Surface-Mount Technology (SMT) passive packaging configuration.
(Logo: http://photos.prnewswire.com/prnh/20090915/LA76126LOGO )
The SESD0201P1BN-0400-090 (0201 package) and SESD0402P1BN-0450-090 (0402 package) devices' bi-directional operation facilitates placement on the printed circuit board (PCB) without orientation constraints and eliminates the need for polarity inspection. Unlike conventional ESD diode packaging using pads on the bottom of the device, the ChipSESD devices' passive package also allows for easy solder inspection after the device has been mounted on the PCB.
The ChipSESD devices feature a surge rating of 2A under 8x20us surge and an ESD rating of 10kV contact discharge. The devices' low-leakage current (1.0uA max) reduces power consumption and a fast response time (<1ns) helps equipment to pass IEC61000-4-2, level 4 testing. Their input capacitance of 4.0pF (0201 package) and 4.5pF (0402 package) makes them suitable for helping to protect:
-- Cellular phones and portable electronics
-- Digital cameras and camcorders
-- Computer I/O ports
-- Keypads, low voltage DC lines, speakers, headphones and microphones
"The ongoing trend toward discrete component miniaturization often presents designers with difficult and time-consuming engineering prototyping and rework challenges as well as manufacturing process control issues," stated Nicole Palma, Product Manager. "Tyco Electronics' new ChipSESD devices help mitigate assembly and manufacturing challenges and speed time to market. They also demonstrate Tyco Electronics' commitment to providing a broad portfolio of smaller scale, higher-performance SMT solutions for the consumer electronics industry."
For further information or technical assistance, call (800) 227-7040, or visit: http://www.circuitprotection.com/esd/#SESD.
SESD0201P1BN-0400-090 (EIA-0201 package) -- $0.105
Price: for 15Kpcs
SESD0402P1BN-0450-090 (EIA-0402 package) -- $0.080
for 10Kpcs
Availability: Prototype samples available now
Delivery: 16 weeks ARO
ABOUT TYCO ELECTRONICS
Tyco Electronics Ltd. is a leading global provider of engineered electronic components, network solutions, specialty products and undersea telecommunication systems, with fiscal 2010 sales of US$12.1 billion to customers in more than 150 countries. We design, manufacture and market products for customers in a broad array of industries including automotive; data communication systems and consumer electronics; telecommunications; aerospace, defense and marine; medical; energy; and lighting. With approximately 7,000 engineers and worldwide manufacturing, sales and customer service capabilities, Tyco Electronics' commitment is our customers' advantage. More information on Tyco Electronics can be found at: http://www.tycoelectronics.com.
TE (logo) and Tyco Electronics are trademarks of the Tyco Electronics group of companies and its licensors.
Contact: Product Communications: Media Communications
----------------------- --------------------
Nicole Palma Hope-Sutton Salvador
Product Manager Manager Marketing Communications
nicole.palma@te.com hope-sutton.salvador@te.com
------------------- ---------------------------
(650) 361-3219 (650) 361-2160
SOURCE Tyco Electronics
Photo:http://photos.prnewswire.com/prnh/20090915/LA76126LOGO
http://photoarchive.ap.org/
Tyco Electronics
CONTACT: Product Communications, Nicole Palma, Product Manager, +1-650-361-3219, nicole.palma@te.com, or Media Communications, Hope-Sutton Salvador, Manager Marketing Communications, +1-650-361-2160, hope-sutton.salvador@te.com, both of Tyco Electronics
Web Site: http://www.tycoelectronics.com
ChipSESD protection devices in standard 0201 and 0402 packages
MENLO PARK, Calif., Feb. 2, 2011 /PRNewswire/ -- Tyco Electronics (TE) has announced the expansion of its silicon ESD (electrostatic discharge) protection product portfolio with the introduction of 0201- and 0402-size devices that are easier to install and rework than traditional semiconductor-packaged ESD devices. The ChipSESD package combines the advantages of an active silicon device with a traditional Surface-Mount Technology (SMT) passive packaging configuration.
(Logo: http://photos.prnewswire.com/prnh/20090915/LA76126LOGO )
The SESD0201P1BN-0400-090 (0201 package) and SESD0402P1BN-0450-090 (0402 package) devices' bi-directional operation facilitates placement on the printed circuit board (PCB) without orientation constraints and eliminates the need for polarity inspection. Unlike conventional ESD diode packaging using pads on the bottom of the device, the ChipSESD devices' passive package also allows for easy solder inspection after the device has been mounted on the PCB.
The ChipSESD devices feature a surge rating of 2A under 8x20us surge and an ESD rating of 10kV contact discharge. The devices' low-leakage current (1.0uA max) reduces power consumption and a fast response time (<1ns) helps equipment to pass IEC61000-4-2, level 4 testing. Their input capacitance of 4.0pF (0201 package) and 4.5pF (0402 package) makes them suitable for helping to protect:
-- Cellular phones and portable electronics
-- Digital cameras and camcorders
-- Computer I/O ports
-- Keypads, low voltage DC lines, speakers, headphones and microphones
"The ongoing trend toward discrete component miniaturization often presents designers with difficult and time-consuming engineering prototyping and rework challenges as well as manufacturing process control issues," stated Nicole Palma, Product Manager. "Tyco Electronics' new ChipSESD devices help mitigate assembly and manufacturing challenges and speed time to market. They also demonstrate Tyco Electronics' commitment to providing a broad portfolio of smaller scale, higher-performance SMT solutions for the consumer electronics industry."
For further information or technical assistance, call (800) 227-7040, or visit: http://www.circuitprotection.com/esd/#SESD.
SESD0201P1BN-0400-090 (EIA-0201 package) -- $0.105
Price: for 15Kpcs
SESD0402P1BN-0450-090 (EIA-0402 package) -- $0.080
for 10Kpcs
Availability: Prototype samples available now
Delivery: 16 weeks ARO
ABOUT TYCO ELECTRONICS
Tyco Electronics Ltd. is a leading global provider of engineered electronic components, network solutions, specialty products and undersea telecommunication systems, with fiscal 2010 sales of US$12.1 billion to customers in more than 150 countries. We design, manufacture and market products for customers in a broad array of industries including automotive; data communication systems and consumer electronics; telecommunications; aerospace, defense and marine; medical; energy; and lighting. With approximately 7,000 engineers and worldwide manufacturing, sales and customer service capabilities, Tyco Electronics' commitment is our customers' advantage. More information on Tyco Electronics can be found at: http://www.tycoelectronics.com.
TE (logo) and Tyco Electronics are trademarks of the Tyco Electronics group of companies and its licensors.
Contact: Product Communications: Media Communications
----------------------- --------------------
Nicole Palma Hope-Sutton Salvador
Product Manager Manager Marketing Communications
nicole.palma@te.com hope-sutton.salvador@te.com
------------------- ---------------------------
(650) 361-3219 (650) 361-2160
SOURCE Tyco Electronics
Photo:http://photos.prnewswire.com/prnh/20090915/LA76126LOGO
http://photoarchive.ap.org/
Tyco Electronics
CONTACT: Product Communications, Nicole Palma, Product Manager, +1-650-361-3219, nicole.palma@te.com, or Media Communications, Hope-Sutton Salvador, Manager Marketing Communications, +1-650-361-2160, hope-sutton.salvador@te.com, both of Tyco Electronics
Web Site: http://www.tycoelectronics.com