CimatronE Saves Cutter Costs for Leading US Mold Maker
Poster: SySAdmin
Posted on February 28, 2013 at 8:42:01 AM
CimatronE Saves Cutter Costs for Leading US Mold Maker
Quality Tooling doubles production speed and saves costs with CimatronE
GIVAT SHMUEL, Israel, February 28, 2013 /PRNewswire/ --
CimatronE, the integrated CAD/CAM tooling solution offered by Cimatron Limited
[http://www.cimatron.com ] (NASDAQ and TASE: CIMT), has helped streamline operations at
Kentucky-based Quality Tooling, one of the most reputable tooling and engineering
providers to the leading automotive and appliance OEMs and suppliers.
Quality Tooling became a Cimatron customer after looking for ways to maximize the
speed at which its machines operated. In many cases, several runs were required to
complete a project and costly cutters needed to be replaced often due to the multiple runs
and inconsistent feed rates and chip loads.
After a review of various CAD/CAM solutions on the market, Quality Tooling selected
CimatronE as its software of choice. Since the business switched to CimatronE, the speed
of production has more than doubled and cutters now last longer, resulting in significant
cost savings.
Said Brian Alvey, Quality Tooling's Vice President: "Making the investment in Cimatron
was a big move for us because we are a small company, but the investment was well worth it
and has probably been one of the best we ever made. Whenever you go looking at what you
are gaining, that investment is very minor because you will save thousands of dollars just
in cutters alone."
"Cimatron keeps a fairly constant chip load and feed rate. Therefore, it maintains
cutter sharpness. Parts are produced quicker because you don't have to go back and rerun
things. If you cut one job in Cimatron, you may use two cutters. If you cut that same job
with one of the lower-end software you may use eight cutters. That translates into major
savings."
CimatronE has also provided Quality Tooling with a closed loop system to streamline
the electrode process. Using the electrode templates saves programming time, and the
simulation capabilities eliminate the need for double setups and the risk of electrodes
hitting parts. If a change is made to the NC file, it automatically updates the
electrodes, leaving less chance for error.
According to Alvey, the addition of CimatronE has brought in more repeat business, as
customers have noticed that delivery times have improved: "We have to compete with the
overseas market and anything we can do to make our products look better is important.
Cimatron has helped us tremendously."
For more information on CimatronE, visit http://www.cimatrone.com.
About Cimatron
With 30 years of experience and more than 40,000 installations worldwide, Cimatron is
a leading provider of integrated, CAD/CAM software solutions for mold, tool and die makers
as well as manufacturers of discrete parts. Cimatron is committed to providing
comprehensive, cost-effective solutions that streamline manufacturing cycles and
ultimately shorten product delivery time.
The Cimatron product line includes the CimatronE and GibbsCAM brands with solutions
for mold design [http://www.cimatron.com/Main/general.aspx?FolderID)97&lang=EN ], die
design [http://www.cimatron.com/Main/general.aspx?FolderIDD70&lang=EN ], electrodes
design [http://www.cimatron.com/Main/general.aspx?FolderIDE15&lang=EN ], 2.5 to 5 axes
milling [http://www.cimatron.com/Main/general.aspx?FolderIDD71&lang=EN ], wire EDM
[http://www.gibbscam.com/solutions/index.php?soX ], turn
[http://www.gibbscam.com/solutions/index.php?so=2 ], mill-turn
[http://www.gibbscam.com/solutions/index.php?page=modules-overview ], rotary milling
[http://www.gibbscam.com/solutions/index.php?page=modules-overview ], multi-task machining
[http://www.gibbscam.com/solutions/index.php?so=2 ], and tombstone machining
[http://www.gibbscam.com/solutions/index.php?page=modules-overview ]. Cimatron's
subsidiaries and extensive distribution network serve and support customers in the
automotive, aerospace, medical, consumer plastics, electronics, and other industries in
over 40 countries worldwide.
Cimatron's shares are publicly traded on the NASDAQ exchange and the Tel Aviv Stock
Exchange under the symbol CIMT. For more information, please visit Cimatron's web site at:
http://www.cimatron.com
This press release includes forward looking statements, within the meaning of the
Private Securities Litigation Reform Act of 1995, which are subject to risk and
uncertainties that could cause actual results to differ materially from those anticipated.
Such statements may relate to Cimatron's plans, objectives and expected financial and
operating results. The words "may," "could," "would," "will," "believe," "anticipate,"
"estimate," "expect," "intend," "plan," and similar expressions or variations thereof are
intended to identify forward-looking statements. Investors are cautioned that any such
forward-looking statements are not guarantees of future performance and involve risks and
uncertainties, many of which are beyond Cimatron's ability to control. The risks and
uncertainties that may affect forward looking statements include, but are not limited to:
currency fluctuations, global economic and political conditions, marketing demand for
Cimatron products and services, long sales cycles, new product development, assimilating
future acquisitions, maintaining relationships with customers and partners, and increased
competition. For more details about the risks and uncertainties related to Cimatron's
business, refer to Cimatron's filings with the Securities and Exchange Commission.
Cimatron cannot assess the impact of or the extent to which any single factor or risk, or
combination of them, may cause. Cimatron undertakes no obligation to publicly update or
revise any forward looking statements, whether as a result of new information, future
events or otherwise.
For More Information Contact:
Idit Pass Lagziel
Marketing Manager
Cimatron Ltd.
Phone: +972-73-237-0298
Email: iditp@cimatron.com
Ilan Erez
Chief Financial Officer
Cimatron Ltd.
Phone: +972-73-237-0114
Email: ilane@cimatron.com
Investor Relations contact:
Ehud Helft/Kenny Green
CCG Investor Relations
Tel: (US) +1-646-201-9246
Email: Cimatron@ccgisrael.com
Cimatron Ltd
Quality Tooling doubles production speed and saves costs with CimatronE
GIVAT SHMUEL, Israel, February 28, 2013 /PRNewswire/ --
CimatronE, the integrated CAD/CAM tooling solution offered by Cimatron Limited
[http://www.cimatron.com ] (NASDAQ and TASE: CIMT), has helped streamline operations at
Kentucky-based Quality Tooling, one of the most reputable tooling and engineering
providers to the leading automotive and appliance OEMs and suppliers.
Quality Tooling became a Cimatron customer after looking for ways to maximize the
speed at which its machines operated. In many cases, several runs were required to
complete a project and costly cutters needed to be replaced often due to the multiple runs
and inconsistent feed rates and chip loads.
After a review of various CAD/CAM solutions on the market, Quality Tooling selected
CimatronE as its software of choice. Since the business switched to CimatronE, the speed
of production has more than doubled and cutters now last longer, resulting in significant
cost savings.
Said Brian Alvey, Quality Tooling's Vice President: "Making the investment in Cimatron
was a big move for us because we are a small company, but the investment was well worth it
and has probably been one of the best we ever made. Whenever you go looking at what you
are gaining, that investment is very minor because you will save thousands of dollars just
in cutters alone."
"Cimatron keeps a fairly constant chip load and feed rate. Therefore, it maintains
cutter sharpness. Parts are produced quicker because you don't have to go back and rerun
things. If you cut one job in Cimatron, you may use two cutters. If you cut that same job
with one of the lower-end software you may use eight cutters. That translates into major
savings."
CimatronE has also provided Quality Tooling with a closed loop system to streamline
the electrode process. Using the electrode templates saves programming time, and the
simulation capabilities eliminate the need for double setups and the risk of electrodes
hitting parts. If a change is made to the NC file, it automatically updates the
electrodes, leaving less chance for error.
According to Alvey, the addition of CimatronE has brought in more repeat business, as
customers have noticed that delivery times have improved: "We have to compete with the
overseas market and anything we can do to make our products look better is important.
Cimatron has helped us tremendously."
For more information on CimatronE, visit http://www.cimatrone.com.
About Cimatron
With 30 years of experience and more than 40,000 installations worldwide, Cimatron is
a leading provider of integrated, CAD/CAM software solutions for mold, tool and die makers
as well as manufacturers of discrete parts. Cimatron is committed to providing
comprehensive, cost-effective solutions that streamline manufacturing cycles and
ultimately shorten product delivery time.
The Cimatron product line includes the CimatronE and GibbsCAM brands with solutions
for mold design [http://www.cimatron.com/Main/general.aspx?FolderID)97&lang=EN ], die
design [http://www.cimatron.com/Main/general.aspx?FolderIDD70&lang=EN ], electrodes
design [http://www.cimatron.com/Main/general.aspx?FolderIDE15&lang=EN ], 2.5 to 5 axes
milling [http://www.cimatron.com/Main/general.aspx?FolderIDD71&lang=EN ], wire EDM
[http://www.gibbscam.com/solutions/index.php?soX ], turn
[http://www.gibbscam.com/solutions/index.php?so=2 ], mill-turn
[http://www.gibbscam.com/solutions/index.php?page=modules-overview ], rotary milling
[http://www.gibbscam.com/solutions/index.php?page=modules-overview ], multi-task machining
[http://www.gibbscam.com/solutions/index.php?so=2 ], and tombstone machining
[http://www.gibbscam.com/solutions/index.php?page=modules-overview ]. Cimatron's
subsidiaries and extensive distribution network serve and support customers in the
automotive, aerospace, medical, consumer plastics, electronics, and other industries in
over 40 countries worldwide.
Cimatron's shares are publicly traded on the NASDAQ exchange and the Tel Aviv Stock
Exchange under the symbol CIMT. For more information, please visit Cimatron's web site at:
http://www.cimatron.com
This press release includes forward looking statements, within the meaning of the
Private Securities Litigation Reform Act of 1995, which are subject to risk and
uncertainties that could cause actual results to differ materially from those anticipated.
Such statements may relate to Cimatron's plans, objectives and expected financial and
operating results. The words "may," "could," "would," "will," "believe," "anticipate,"
"estimate," "expect," "intend," "plan," and similar expressions or variations thereof are
intended to identify forward-looking statements. Investors are cautioned that any such
forward-looking statements are not guarantees of future performance and involve risks and
uncertainties, many of which are beyond Cimatron's ability to control. The risks and
uncertainties that may affect forward looking statements include, but are not limited to:
currency fluctuations, global economic and political conditions, marketing demand for
Cimatron products and services, long sales cycles, new product development, assimilating
future acquisitions, maintaining relationships with customers and partners, and increased
competition. For more details about the risks and uncertainties related to Cimatron's
business, refer to Cimatron's filings with the Securities and Exchange Commission.
Cimatron cannot assess the impact of or the extent to which any single factor or risk, or
combination of them, may cause. Cimatron undertakes no obligation to publicly update or
revise any forward looking statements, whether as a result of new information, future
events or otherwise.
For More Information Contact:
Idit Pass Lagziel
Marketing Manager
Cimatron Ltd.
Phone: +972-73-237-0298
Email: iditp@cimatron.com
Ilan Erez
Chief Financial Officer
Cimatron Ltd.
Phone: +972-73-237-0114
Email: ilane@cimatron.com
Investor Relations contact:
Ehud Helft/Kenny Green
CCG Investor Relations
Tel: (US) +1-646-201-9246
Email: Cimatron@ccgisrael.com
Cimatron Ltd