GibbsCAM Simplifies Machining of Turbomachinery Components
Poster: SySAdmin
Posted on October 4, 2013 at 10:35:01 AM
GibbsCAM Simplifies Machining of Turbomachinery Components
New Software is Optimized for Machining Bladed Parts
MOORPARK, California, October 4, 2013 /PRNewswire/ --
Cimatron Limited (NASDAQ: CIMT), a leading provider of integrated CAD/CAM software
solutions for the toolmaking and manufacturing industries, today announced availability of
two new options for its GibbsCAM [http://www.gibbscam.com ](R) software specifically
developed to simplify the 5-axis programming required to make turbomachinery parts. The
new options have user interfaces that are optimized for fast selection of geometry and
toolpath parameters to program machining of impellers, blisks (bladed disks) and blings
(bladed rings). These bladed parts, which are used in compressing gas and liquids, or
transporting them under pressurized flow, are common components in the aerospace,
automotive and power generation industries.
Each of the two new software options targets different levels of specialization and
part complexity in bladed-part manufacturing. While 5-Axis MultiBlade Level 1 is designed
for parts of simpler to moderate complexity, 5-Axis MultiBlade Level 2 increases the
selectable toolpath options to accommodate the most complex bladed parts, which may have
multiple smaller blades (known as splitters and sub-splitters) between the main blades.
The GibbsCAM 5-Axis MultiBlade options operate within the GibbsCAM 5-Axis software,
accommodate both 5-axis machining centers and multi-task machines, and are available
immediately.
Features of GibbsCAM 5-Axis MultiBlade Level 1
When added to GibbsCAM 5-Axis, MultiBlade Level 1 simplifies programming and machining
of blisks, blings and impellers having single splitters or no splitters. Toolpath
strategies include 5-axis simultaneous roughing, hub finishing, and blade and splitter
finishing, with automatic gouge checking on all toolpaths. The interface includes options
for leading- and trailing-edge extension and control, plus intelligent controls for
rotating toolpaths around the part.
- Roughing between blades with splitter support
- Blade, splitter and hub finishing
- Leading- and trailing-edge extension and control
- Tool axis tilt controls
- Toolpath axis rotations
- Automatic axis detection
- Automatic and user definable links and clearances
Incremental Features of GibbsCAM 5-Axis MultiBlade Level 2
When added to Level 1, MultiBlade Level 2 provides incremental capabilities to
simplify programming and machining of parts that have multiple splitters and/or
sub-splitters. It adds a fillet machining strategy and provides additional control for all
toolpath strategies.
- Blade fillet finishing
- Tool axis smoothing
- Splitter smoothing
- Multiple splitter support
- More control for tilt, leading & trailing edges, and all toolpath strategies
- Toolpath segment sorting
- Stock definition for rest machining
In addition to simplifying and speeding up the programming process, the GibbsCAM
5-Axis MultiBlade options generate cleaner, more efficient toolpaths for faster machining,
better surface finish, and higher quality parts.
About Gibbs and Associates and GibbsCAM
For over thirty years, Gibbs and Associates has been a leader in providing cutting
edge CAD/CAM technology, while maintaining its signature ease-of-use and productivity.
Powerfully Simple, Simply Powerful is the guiding philosophy at Gibbs. Gibbs believes in
empowering the NC programmer, machinist, and manufacturing engineer, not eliminating them.
Gibbs' goal is to introduce manufacturers to new technologies and new ways of working that
makes their machining easier and their businesses more profitable. To achieve this goal,
Gibbs creates tools that are naturally intuitive, graphically interactive, extremely
visual, associative, and just plain enjoyable to use. Gibbs provides a total quality
solution with the service and support that successful customers require.
The current GibbsCAM product line supports 2- through 5-axis milling, turning,
mill/turning, multi-task simultaneous machining and wire-EDM. GibbsCAM also provides fully
integrated manufacturing modeling capabilities that include 2D, 2.5D, 3D wireframe,
surface, and solid modeling. GibbsCAM is Compatible with Windows 7, Windows 8 and
Certified for Windows Vista. GibbsCAM's data exchange capabilities are able to access the
broadest range of native and industry standard CAD data formats. GibbsCAM is certified
under the Autodesk Inventor Certified Program, is a Siemens Solution Partner Program-PLM
for Solid Edge product, is a Gold Tier Partner within the PTC Partner Advantage Program
and is a SolidWorks Certified CAM Product. GibbsCAM is either offered or endorsed by a
number of leading worldwide control and machine tool manufacturers, including GE Fanuc,
Infimatic, Siemens, Doosan Infracore, DMG / MORI SEIKI, Haas, Index, MAG, Mazak,
Mitsubishi, Okuma and Tornos. Gibbs and Associates distributes its products worldwide
through a network of international Resellers.
In January 2008, Gibbs and Associates merged with Cimatron Ltd., and is now operating
as a wholly owned subsidiary. For more information about Gibbs and Associates and its CAM
software packages, visit http://www.GibbsCAM.com or call 1-800-654-9399 (outside of
North America, call +1-805-523-0004).
About Cimatron
With over 30 years of experience and more than 40,000 installations worldwide,
Cimatron Ltd., or Cimatron, is a leading provider of integrated, CAD/CAM software
solutions for mold, tool and die makers as well as manufacturers of discrete parts.
Cimatron is committed to providing comprehensive, cost-effective solutions that streamline
manufacturing cycles, enable collaboration with outside vendors, and ultimately shorten
product delivery time.
The Cimatron product line includes the CimatronE and GibbsCAM brands with solutions
for mold design [http://www.cimatron.com/Main/general.aspx?FolderID)97&lang=EN ], die
design [http://www.cimatron.com/Main/general.aspx?FolderIDD70&lang=EN ], electrodes
design [http://www.cimatron.com/Main/general.aspx?FolderIDE15&lang=EN ], 2.5 to 5 axes
milling [http://www.gibbscam.com/solutions/index.php?so=1 ], wire EDM
[http://www.gibbscam.com/solutions/index.php?soX ], turn
[http://www.gibbscam.com/solutions/index.php?so=2 ], mill-turn
[http://www.gibbscam.com/solutions/index.php?page=modules-overview ], rotary milling
[http://www.gibbscam.com/solutions/index.php?page=modules-overview ], multi-task machining
[http://www.gibbscam.com/solutions/index.php?so=2 ], and tombstone machining
[http://www.gibbscam.com/solutions/index.php?page=modules-overview ]. Cimatron's
subsidiaries and extensive distribution network serve and support customers in the
automotive, aerospace, medical, consumer plastics, electronics, and other industries in
over 40 countries worldwide.
Cimatron's shares are publicly traded on the NASDAQ under the symbol CIMT. For more
information, visit http://www.cimatron.com.
The Gibbs logo, GibbsCAM, GibbsCAM logo, Virtual Gibbs, and "Powerfully Simple. Simply
Powerful." are either trademark(s) or registered trademark(s) of Gibbs and Associates in
the United States and/or other countries. Microsoft, Windows and the Windows logo are
trademarks of the Microsoft group of companies. All other brand or product names are
trademarks or registered trademarks of their respective owners.
Safe Harbor Statement
This press release includes forward looking statements, within the meaning of the
Private Securities Litigation Reform Act of 1995, which are subject to risk and
uncertainties that could cause actual results to differ materially from those anticipated.
Such statements may relate to Cimatron's plans, objectives and expected financial and
operating results. The words "may," "could," "would," "will," "believe," "anticipate,"
"estimate," "expect," "intend," "plan," and similar expressions or variations thereof are
intended to identify forward-looking statements. Investors are cautioned that any such
forward-looking statements are not guarantees of future performance and involve risks and
uncertainties, many of which are beyond the company's ability to control. The risks and
uncertainties that may affect forward looking statements include, but are not limited to:
currency fluctuations, global economic and political conditions, marketing demand for
Gibbs and Associates or Cimatron products and services, long sales cycles, new product
development, assimilating future acquisitions, maintaining relationships with customers
and partners, and increased competition. For more details about the risks and
uncertainties related to Cimatron's business, refer to its filings with the Securities and
Exchange Commission. The company cannot assess the impact of or the extent to which any
single factor or risk, or combination of them, may cause. Gibbs and Associates and
Cimatron undertake no obligation to publicly update or revise any forward looking
statements, whether as a result of new information, future events or otherwise.
For more information, contact:
Ilan Erez
Chief Financial Officer
Cimatron Ltd.
Phone: +972-73-237-0114
ilane@cimatron.com
Yvonne Anderson
MarCom Manager
Gibbs and Associates
+1(805)-523-0004
YvonneA@GibbsCAM.com
Investor Relations contact:
Ehud Helft/Kenny Green
CCG Investor Relations
Tel: (US) +1-646-201-9246
Cimatron@ccgisrael.com
Cimatron Ltd
New Software is Optimized for Machining Bladed Parts
MOORPARK, California, October 4, 2013 /PRNewswire/ --
Cimatron Limited (NASDAQ: CIMT), a leading provider of integrated CAD/CAM software
solutions for the toolmaking and manufacturing industries, today announced availability of
two new options for its GibbsCAM [http://www.gibbscam.com ](R) software specifically
developed to simplify the 5-axis programming required to make turbomachinery parts. The
new options have user interfaces that are optimized for fast selection of geometry and
toolpath parameters to program machining of impellers, blisks (bladed disks) and blings
(bladed rings). These bladed parts, which are used in compressing gas and liquids, or
transporting them under pressurized flow, are common components in the aerospace,
automotive and power generation industries.
Each of the two new software options targets different levels of specialization and
part complexity in bladed-part manufacturing. While 5-Axis MultiBlade Level 1 is designed
for parts of simpler to moderate complexity, 5-Axis MultiBlade Level 2 increases the
selectable toolpath options to accommodate the most complex bladed parts, which may have
multiple smaller blades (known as splitters and sub-splitters) between the main blades.
The GibbsCAM 5-Axis MultiBlade options operate within the GibbsCAM 5-Axis software,
accommodate both 5-axis machining centers and multi-task machines, and are available
immediately.
Features of GibbsCAM 5-Axis MultiBlade Level 1
When added to GibbsCAM 5-Axis, MultiBlade Level 1 simplifies programming and machining
of blisks, blings and impellers having single splitters or no splitters. Toolpath
strategies include 5-axis simultaneous roughing, hub finishing, and blade and splitter
finishing, with automatic gouge checking on all toolpaths. The interface includes options
for leading- and trailing-edge extension and control, plus intelligent controls for
rotating toolpaths around the part.
- Roughing between blades with splitter support
- Blade, splitter and hub finishing
- Leading- and trailing-edge extension and control
- Tool axis tilt controls
- Toolpath axis rotations
- Automatic axis detection
- Automatic and user definable links and clearances
Incremental Features of GibbsCAM 5-Axis MultiBlade Level 2
When added to Level 1, MultiBlade Level 2 provides incremental capabilities to
simplify programming and machining of parts that have multiple splitters and/or
sub-splitters. It adds a fillet machining strategy and provides additional control for all
toolpath strategies.
- Blade fillet finishing
- Tool axis smoothing
- Splitter smoothing
- Multiple splitter support
- More control for tilt, leading & trailing edges, and all toolpath strategies
- Toolpath segment sorting
- Stock definition for rest machining
In addition to simplifying and speeding up the programming process, the GibbsCAM
5-Axis MultiBlade options generate cleaner, more efficient toolpaths for faster machining,
better surface finish, and higher quality parts.
About Gibbs and Associates and GibbsCAM
For over thirty years, Gibbs and Associates has been a leader in providing cutting
edge CAD/CAM technology, while maintaining its signature ease-of-use and productivity.
Powerfully Simple, Simply Powerful is the guiding philosophy at Gibbs. Gibbs believes in
empowering the NC programmer, machinist, and manufacturing engineer, not eliminating them.
Gibbs' goal is to introduce manufacturers to new technologies and new ways of working that
makes their machining easier and their businesses more profitable. To achieve this goal,
Gibbs creates tools that are naturally intuitive, graphically interactive, extremely
visual, associative, and just plain enjoyable to use. Gibbs provides a total quality
solution with the service and support that successful customers require.
The current GibbsCAM product line supports 2- through 5-axis milling, turning,
mill/turning, multi-task simultaneous machining and wire-EDM. GibbsCAM also provides fully
integrated manufacturing modeling capabilities that include 2D, 2.5D, 3D wireframe,
surface, and solid modeling. GibbsCAM is Compatible with Windows 7, Windows 8 and
Certified for Windows Vista. GibbsCAM's data exchange capabilities are able to access the
broadest range of native and industry standard CAD data formats. GibbsCAM is certified
under the Autodesk Inventor Certified Program, is a Siemens Solution Partner Program-PLM
for Solid Edge product, is a Gold Tier Partner within the PTC Partner Advantage Program
and is a SolidWorks Certified CAM Product. GibbsCAM is either offered or endorsed by a
number of leading worldwide control and machine tool manufacturers, including GE Fanuc,
Infimatic, Siemens, Doosan Infracore, DMG / MORI SEIKI, Haas, Index, MAG, Mazak,
Mitsubishi, Okuma and Tornos. Gibbs and Associates distributes its products worldwide
through a network of international Resellers.
In January 2008, Gibbs and Associates merged with Cimatron Ltd., and is now operating
as a wholly owned subsidiary. For more information about Gibbs and Associates and its CAM
software packages, visit http://www.GibbsCAM.com or call 1-800-654-9399 (outside of
North America, call +1-805-523-0004).
About Cimatron
With over 30 years of experience and more than 40,000 installations worldwide,
Cimatron Ltd., or Cimatron, is a leading provider of integrated, CAD/CAM software
solutions for mold, tool and die makers as well as manufacturers of discrete parts.
Cimatron is committed to providing comprehensive, cost-effective solutions that streamline
manufacturing cycles, enable collaboration with outside vendors, and ultimately shorten
product delivery time.
The Cimatron product line includes the CimatronE and GibbsCAM brands with solutions
for mold design [http://www.cimatron.com/Main/general.aspx?FolderID)97&lang=EN ], die
design [http://www.cimatron.com/Main/general.aspx?FolderIDD70&lang=EN ], electrodes
design [http://www.cimatron.com/Main/general.aspx?FolderIDE15&lang=EN ], 2.5 to 5 axes
milling [http://www.gibbscam.com/solutions/index.php?so=1 ], wire EDM
[http://www.gibbscam.com/solutions/index.php?soX ], turn
[http://www.gibbscam.com/solutions/index.php?so=2 ], mill-turn
[http://www.gibbscam.com/solutions/index.php?page=modules-overview ], rotary milling
[http://www.gibbscam.com/solutions/index.php?page=modules-overview ], multi-task machining
[http://www.gibbscam.com/solutions/index.php?so=2 ], and tombstone machining
[http://www.gibbscam.com/solutions/index.php?page=modules-overview ]. Cimatron's
subsidiaries and extensive distribution network serve and support customers in the
automotive, aerospace, medical, consumer plastics, electronics, and other industries in
over 40 countries worldwide.
Cimatron's shares are publicly traded on the NASDAQ under the symbol CIMT. For more
information, visit http://www.cimatron.com.
The Gibbs logo, GibbsCAM, GibbsCAM logo, Virtual Gibbs, and "Powerfully Simple. Simply
Powerful." are either trademark(s) or registered trademark(s) of Gibbs and Associates in
the United States and/or other countries. Microsoft, Windows and the Windows logo are
trademarks of the Microsoft group of companies. All other brand or product names are
trademarks or registered trademarks of their respective owners.
Safe Harbor Statement
This press release includes forward looking statements, within the meaning of the
Private Securities Litigation Reform Act of 1995, which are subject to risk and
uncertainties that could cause actual results to differ materially from those anticipated.
Such statements may relate to Cimatron's plans, objectives and expected financial and
operating results. The words "may," "could," "would," "will," "believe," "anticipate,"
"estimate," "expect," "intend," "plan," and similar expressions or variations thereof are
intended to identify forward-looking statements. Investors are cautioned that any such
forward-looking statements are not guarantees of future performance and involve risks and
uncertainties, many of which are beyond the company's ability to control. The risks and
uncertainties that may affect forward looking statements include, but are not limited to:
currency fluctuations, global economic and political conditions, marketing demand for
Gibbs and Associates or Cimatron products and services, long sales cycles, new product
development, assimilating future acquisitions, maintaining relationships with customers
and partners, and increased competition. For more details about the risks and
uncertainties related to Cimatron's business, refer to its filings with the Securities and
Exchange Commission. The company cannot assess the impact of or the extent to which any
single factor or risk, or combination of them, may cause. Gibbs and Associates and
Cimatron undertake no obligation to publicly update or revise any forward looking
statements, whether as a result of new information, future events or otherwise.
For more information, contact:
Ilan Erez
Chief Financial Officer
Cimatron Ltd.
Phone: +972-73-237-0114
ilane@cimatron.com
Yvonne Anderson
MarCom Manager
Gibbs and Associates
+1(805)-523-0004
YvonneA@GibbsCAM.com
Investor Relations contact:
Ehud Helft/Kenny Green
CCG Investor Relations
Tel: (US) +1-646-201-9246
Cimatron@ccgisrael.com
Cimatron Ltd