Page All:
Page 1
Microsemi Unveils Low-cost miSLIC Line Circuits for Broadband Gateways
The World Leader in Voice Line Circuit Shipments Continues to Strengthen Product Portfolio
ALISO VIEJO, Calif., Oct. 22, 2013 /PRNewswire/ -- Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today unveiled its new miSLIC(TM) Series line circuits in booths E21-E22 at the Broadband World Forum tradeshow in Amsterdam. The new fifth-generation telephone line interface solution provides worldwide network operators with the industry's most economical solution for adding two channels of voice to broadband products including residential gateways, DSL integrated access devices (IADs), cable embedded multimedia terminal adapters (eMTAs) and fiber-to-the-premise (FTTX) solutions.
(Photo: http://photos.prnewswire.com/prnh/20131022/LA96955)
(Logo: http://photos.prnewswire.com/prnh/20110909/MM66070LOGO)
The new Le9662 and Le9672 are designed for applications requiring shared or individual power supplies. Both miSLIC Series line circuits support ringing and system power management, enabling energy efficient control of two telephone lines for meeting the European Code of Conduct on Energy Consumption of Broadband Equipment specifications. The new solutions are also compatible with processors developed by leading system-on-chip (SoC) vendors for residential gateway applications.
"Microsemi's new miSLIC Series line circuits and shared buck boost power supply are a winning combination for adding two channels of voice to VoIP enabled broadband gateways," said Nigel Wakley, director of marketing for Microsemi's Voice product group. "With more than 900 million voice line circuits shipped to customers globally, Microsemi continues to build on its leadership position in this segment by delivering innovative new products that provide our customers with a competitive edge."
The new Le9662 features a patent-pending shared power supply design that rivals the most efficient power supplies available today, only consuming approximately 51 milliwatts of power per channel in the low power standby state. The unique design also enables cost-savings of approximately 30 percent over alternative power supply configurations. To further reduce development costs, it is provided as an economical two-layer reference design board.
Microsemi's residential gateway solutions allow customers to add voice capabilities to customer premises equipment (CPE) easily and cost-effectively. These products deliver the highest levels of integration available today and are optimized for short loop, power-sensitive applications. Microsemi also offers an extensive application toolset to complement these devices, including software development tools, reference designs and development platforms, to speed time-to-market.
Packaging and Availability
The miSLIC Series solutions are available in a 56-pin quad flat no lead (QFN) package and are sampling now. Pricing starts at $2.70 in 1,000 unit quantities. For more information contact a local sales representative or email sales.support@microsemi.com and reference "miSLIC" in the subject line.
About Microsemi
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense & security, aerospace and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and voice processing devices; RF solutions; discrete components; security technologies and scalable anti-tamper products; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 3,000 employees globally. Learn more at http://www.microsemi.com.
Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.
"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements related to its new miSLIC Series line circuits, and its potential effects on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.
MSCCP
SOURCE Microsemi Corporation
Photo:http://photos.prnewswire.com/prnh/20131022/LA96955
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20110909/MM66070LOGO
http://photoarchive.ap.org/
Microsemi Corporation
CONTACT: Gwen Carlson, Director of Corporate Communications, 949.380.6135; Beth P. Quezada, Communications Specialist, 949.380.6102, press@microsemi.com
Web Site: http://www.microsemi.com
Microsemi Unveils Low-cost miSLIC Line Circuits for Broadband Gateways
The World Leader in Voice Line Circuit Shipments Continues to Strengthen Product Portfolio
ALISO VIEJO, Calif., Oct. 22, 2013 /PRNewswire/ -- Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today unveiled its new miSLIC(TM) Series line circuits in booths E21-E22 at the Broadband World Forum tradeshow in Amsterdam. The new fifth-generation telephone line interface solution provides worldwide network operators with the industry's most economical solution for adding two channels of voice to broadband products including residential gateways, DSL integrated access devices (IADs), cable embedded multimedia terminal adapters (eMTAs) and fiber-to-the-premise (FTTX) solutions.
(Photo: http://photos.prnewswire.com/prnh/20131022/LA96955)
(Logo: http://photos.prnewswire.com/prnh/20110909/MM66070LOGO)
The new Le9662 and Le9672 are designed for applications requiring shared or individual power supplies. Both miSLIC Series line circuits support ringing and system power management, enabling energy efficient control of two telephone lines for meeting the European Code of Conduct on Energy Consumption of Broadband Equipment specifications. The new solutions are also compatible with processors developed by leading system-on-chip (SoC) vendors for residential gateway applications.
"Microsemi's new miSLIC Series line circuits and shared buck boost power supply are a winning combination for adding two channels of voice to VoIP enabled broadband gateways," said Nigel Wakley, director of marketing for Microsemi's Voice product group. "With more than 900 million voice line circuits shipped to customers globally, Microsemi continues to build on its leadership position in this segment by delivering innovative new products that provide our customers with a competitive edge."
The new Le9662 features a patent-pending shared power supply design that rivals the most efficient power supplies available today, only consuming approximately 51 milliwatts of power per channel in the low power standby state. The unique design also enables cost-savings of approximately 30 percent over alternative power supply configurations. To further reduce development costs, it is provided as an economical two-layer reference design board.
Microsemi's residential gateway solutions allow customers to add voice capabilities to customer premises equipment (CPE) easily and cost-effectively. These products deliver the highest levels of integration available today and are optimized for short loop, power-sensitive applications. Microsemi also offers an extensive application toolset to complement these devices, including software development tools, reference designs and development platforms, to speed time-to-market.
Packaging and Availability
The miSLIC Series solutions are available in a 56-pin quad flat no lead (QFN) package and are sampling now. Pricing starts at $2.70 in 1,000 unit quantities. For more information contact a local sales representative or email sales.support@microsemi.com and reference "miSLIC" in the subject line.
About Microsemi
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense & security, aerospace and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and voice processing devices; RF solutions; discrete components; security technologies and scalable anti-tamper products; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 3,000 employees globally. Learn more at http://www.microsemi.com.
Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.
"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements related to its new miSLIC Series line circuits, and its potential effects on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.
MSCCP
SOURCE Microsemi Corporation
Photo:http://photos.prnewswire.com/prnh/20131022/LA96955
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20110909/MM66070LOGO
http://photoarchive.ap.org/
Microsemi Corporation
CONTACT: Gwen Carlson, Director of Corporate Communications, 949.380.6135; Beth P. Quezada, Communications Specialist, 949.380.6102, press@microsemi.com
Web Site: http://www.microsemi.com