Page All:
Page 1
OmniVision Unveils PureCel®Plus and PureCel®Plus-S Technology
Advanced Sensor Technology Marks Evolution in Pixel Structure
SANTA CLARA, Calif., Nov. 8, 2015 /PRNewswire/ -- OmniVision Technologies, Inc. (NASDAQ: OVTI), a leading developer of advanced digital imaging solutions, today announced the latest advancement in its portfolio of innovative pixel technologies: PureCel(®)Plus and PureCel(®)Plus-S. Utilizing a buried color filter array (BCFA) and deep trench isolation (DTI) technology, PureCel Plus and PureCel Plus-S sensors deliver best-in-class pixel performance with significant improvements in low-light performance and crosstalk reduction.
One of the key benefits of PureCel Plus technology is the reduction of pixel crosstalk, which minimizes color crosstalk and color noise, dramatically improving color reproduction under low-light conditions. Another critical benefit is the angular response of the sensor. With PureCel Plus technology, OmniVision's sensors can provide higher signal response at a larger incident light angle than the one with predecessor technologies. This technology greatly increases the tolerance of new camera systems to incident light angles. As a result, with PureCel Plus sensors, module design houses can use brighter lenses and build camera systems with much thinner geometries.
"It has long been an industry-wide presumption that increasing resolution by reducing pixel size may result in the degradation of camera performance, due to low-light sensitivity. However, as we are seeing with PureCel Plus, that is not always the case," said Dr. Song Xue, senior manager of sensor technology at OmniVision. "Our new 1.0 micron sensors built on PureCel Plus technology will exhibit the same level of signal-to-noise ratio as 1.12 micron sensors built on our previous generation technologies. Today's advancement enables us to continue reducing pixel size while maintaining the highest image and video quality standards."
In addition to PureCel Plus, PureCel Plus-S leverages OmniVision's stacked die technology, which separates the imaging sensor array from the image sensor processing pipeline. This configuration supports additional system functionality and improves sensor performance, while enabling a much smaller footprint when compared with non-stacked sensors. As a result, sensors built with PureCel Plus-S technology can deliver best-in-class image quality and high functionality with minimal chip size.
About OmniVision
OmniVision Technologies (NASDAQ: OVTI) is a leading developer of advanced digital imaging solutions. Its award-winning CMOS imaging technology enables superior image quality in many of today's consumer and commercial applications, including mobile phones, notebooks, tablets and webcams, digital still and video cameras, security and surveillance, entertainment devices, automotive and medical imaging systems. Find out more at http://www.ovt.com.
Safe-Harbor Language
Certain statements in this press release, including statements regarding the expected benefits, performance, capabilities, and potential market appealof PureCel(®)Plus and PureCel(®)Plus-S are forward-looking statements that are subject to risks and uncertainties. These risks and uncertainties, which could cause the forward-looking statements and OmniVision's results to differ materially, include, without limitation: potential errors, design flaws or other problems with PureCel(®)Plus and PureCel(®)Plus-S, customer acceptance, demand, and other risks detailed from time to time in OmniVision's Securities and Exchange Commission filings and reports, including, but not limited to, OmniVision's annual report filed on Form 10-K and quarterly reports filed on Form 10-Q. OmniVision expressly disclaims any obligation to update information contained in any forward-looking statement.
OmniVision®, PureCel(®) and the OmniVision logo are registered trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners.
SOURCE OmniVision Technologies, Inc.
OmniVision Technologies, Inc.
CONTACT: Cameron Crowe, Impress Labs, 415.735.8420, cameron@impresslabs.com; Scott Foster, OmniVision Technologies, 408.567.3077, sfoster@ovt.com
Web Site: http://www.ovt.com
OmniVision Unveils PureCel®Plus and PureCel®Plus-S Technology
Advanced Sensor Technology Marks Evolution in Pixel Structure
SANTA CLARA, Calif., Nov. 8, 2015 /PRNewswire/ -- OmniVision Technologies, Inc. (NASDAQ: OVTI), a leading developer of advanced digital imaging solutions, today announced the latest advancement in its portfolio of innovative pixel technologies: PureCel(®)Plus and PureCel(®)Plus-S. Utilizing a buried color filter array (BCFA) and deep trench isolation (DTI) technology, PureCel Plus and PureCel Plus-S sensors deliver best-in-class pixel performance with significant improvements in low-light performance and crosstalk reduction.
One of the key benefits of PureCel Plus technology is the reduction of pixel crosstalk, which minimizes color crosstalk and color noise, dramatically improving color reproduction under low-light conditions. Another critical benefit is the angular response of the sensor. With PureCel Plus technology, OmniVision's sensors can provide higher signal response at a larger incident light angle than the one with predecessor technologies. This technology greatly increases the tolerance of new camera systems to incident light angles. As a result, with PureCel Plus sensors, module design houses can use brighter lenses and build camera systems with much thinner geometries.
"It has long been an industry-wide presumption that increasing resolution by reducing pixel size may result in the degradation of camera performance, due to low-light sensitivity. However, as we are seeing with PureCel Plus, that is not always the case," said Dr. Song Xue, senior manager of sensor technology at OmniVision. "Our new 1.0 micron sensors built on PureCel Plus technology will exhibit the same level of signal-to-noise ratio as 1.12 micron sensors built on our previous generation technologies. Today's advancement enables us to continue reducing pixel size while maintaining the highest image and video quality standards."
In addition to PureCel Plus, PureCel Plus-S leverages OmniVision's stacked die technology, which separates the imaging sensor array from the image sensor processing pipeline. This configuration supports additional system functionality and improves sensor performance, while enabling a much smaller footprint when compared with non-stacked sensors. As a result, sensors built with PureCel Plus-S technology can deliver best-in-class image quality and high functionality with minimal chip size.
About OmniVision
OmniVision Technologies (NASDAQ: OVTI) is a leading developer of advanced digital imaging solutions. Its award-winning CMOS imaging technology enables superior image quality in many of today's consumer and commercial applications, including mobile phones, notebooks, tablets and webcams, digital still and video cameras, security and surveillance, entertainment devices, automotive and medical imaging systems. Find out more at http://www.ovt.com.
Safe-Harbor Language
Certain statements in this press release, including statements regarding the expected benefits, performance, capabilities, and potential market appealof PureCel(®)Plus and PureCel(®)Plus-S are forward-looking statements that are subject to risks and uncertainties. These risks and uncertainties, which could cause the forward-looking statements and OmniVision's results to differ materially, include, without limitation: potential errors, design flaws or other problems with PureCel(®)Plus and PureCel(®)Plus-S, customer acceptance, demand, and other risks detailed from time to time in OmniVision's Securities and Exchange Commission filings and reports, including, but not limited to, OmniVision's annual report filed on Form 10-K and quarterly reports filed on Form 10-Q. OmniVision expressly disclaims any obligation to update information contained in any forward-looking statement.
OmniVision®, PureCel(®) and the OmniVision logo are registered trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners.
SOURCE OmniVision Technologies, Inc.
OmniVision Technologies, Inc.
CONTACT: Cameron Crowe, Impress Labs, 415.735.8420, cameron@impresslabs.com; Scott Foster, OmniVision Technologies, 408.567.3077, sfoster@ovt.com
Web Site: http://www.ovt.com