Page All:
Page 1
Fluke ScopeMeter 120B Series simplifies and speeds electro-mechanical troubleshooting
The new industrial handheld oscilloscope is the first with IntellaSet intelligent measurement detection that automatically displays the most relevant measurement values
EVERETT, Wash., Feb. 16, 2016 /PRNewswire/ -- Today's industrial machinery is more reliable and efficient, but can also be more difficult to troubleshoot because of the complexities of its advanced systems. The new Fluke(®) ScopeMeter(®) 120B Series Industrial Handheld Oscilloscope is designed to address these challenges with innovative features that improve the speed, efficiency, and accuracy of troubleshooting complex electro-mechanical systems.
https://photos.prnewswire.com/prnvar/20160210/331911
The compact ScopeMeter(®) 120B Series features Connect-and-View(TM) technology that recognizes signal patterns and automatically sets up the scope's triggering, amplitude, and time base eliminating the typical trial-and-error setup process. Once the waveform is captured, the new IntellaSet(TM) intelligent measurement detection automatically selects key measurements based on the acquired waveform type and displays the most relevant measurement values (for example, Vrms and Hz for a line voltage signal, or Vpeak-peak and Hz for a square wave), helping technicians easily identify and characterize potential signal faults.
The 120B Series also features Event Capture function that captures and identifies elusive intermittent events and lists all those events that exceed a predetermined threshold. This lets technicians identify key events quickly, rather than combing through large data sets, reading by reading.
As part of Fluke Connect(®) -- a system of wireless test tools that communicate via the Fluke Connect(®) app, or Fluke Connect Assets software, a cloud-based solution that gathers measurements to provide a comprehensive view of critical equipment status -- the 120B Series can automatically record waveform data to the Fluke Connect app on smartphones or tablets ensuring accuracy and eliminating manual recording of data. Those measurements are then wirelessly uploaded to the cloud and can be combined with measurement data from multiple Fluke Connect test tools to create and share reports from the job site via email and collaborate in real time with other colleagues, increasing productivity in the field.* Storing then comparing and contrasting waveforms of specific asset test points over time enables maintenance engineers to better identify and troubleshoot conditions that can lead to failures.
The wireless 120B Series also allows technicians to place the meter in locations that are difficult to access or are potentially hazardous, then take measurements from a safe distance.
For more information on the Fluke ScopeMeter(®) 120B Series Industrial Handheld Oscilloscope, visit: http://www.fluke.com/120b.
For information on Fluke tools and applications, or to find the location of your nearest distributor, contact Fluke Corporation, P.O. Box 9090, Everett, WA USA 98206, call (800) 44-FLUKE (800-443-5853), fax (425) 446-5116, e-mail fluke-info@fluke.com or visit the Fluke Web site at http://www.fluke.com.
About Fluke
Founded in 1948, Fluke Corporation is the world leader in compact, professional electronic test tools. Fluke customers are technicians, engineers, electricians, and metrologists who install, troubleshoot and manage industrial, electrical and electronic equipment and calibration processes.
Fluke is a registered trademark of Fluke Corporation. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. For more information, visit the Fluke website.
* Within your provider's wireless service area and subject to your plan's pricing and other terms. Fluke Connect is not available in all countries. Some Fluke Connect features require a subscription subject to payment terms and may not be available in all countries.
For more information:
Dan Wright
Communications Manager
(425) 446-5638
dan.wright@fluke.com
https://photos.prnewswire.com/prnvar/20120130/SF43337LOGO-b
Photo - http://photos.prnewswire.com/prnh/20160210/331911
Logo - http://photos.prnewswire.com/prn/20120130/SF43337LOGO-b
SOURCE Fluke Corp.
Photo:https://photos.prnewswire.com/prnh/20160210/331911
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20120130/SF43337LOGO-b
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20160210/331911
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20120130/SF43337LOGO-b
http://photoarchive.ap.org/
Fluke Corp.
Web Site: http://www.fluke.com
Fluke ScopeMeter 120B Series simplifies and speeds electro-mechanical troubleshooting
The new industrial handheld oscilloscope is the first with IntellaSet intelligent measurement detection that automatically displays the most relevant measurement values
EVERETT, Wash., Feb. 16, 2016 /PRNewswire/ -- Today's industrial machinery is more reliable and efficient, but can also be more difficult to troubleshoot because of the complexities of its advanced systems. The new Fluke(®) ScopeMeter(®) 120B Series Industrial Handheld Oscilloscope is designed to address these challenges with innovative features that improve the speed, efficiency, and accuracy of troubleshooting complex electro-mechanical systems.
https://photos.prnewswire.com/prnvar/20160210/331911
The compact ScopeMeter(®) 120B Series features Connect-and-View(TM) technology that recognizes signal patterns and automatically sets up the scope's triggering, amplitude, and time base eliminating the typical trial-and-error setup process. Once the waveform is captured, the new IntellaSet(TM) intelligent measurement detection automatically selects key measurements based on the acquired waveform type and displays the most relevant measurement values (for example, Vrms and Hz for a line voltage signal, or Vpeak-peak and Hz for a square wave), helping technicians easily identify and characterize potential signal faults.
The 120B Series also features Event Capture function that captures and identifies elusive intermittent events and lists all those events that exceed a predetermined threshold. This lets technicians identify key events quickly, rather than combing through large data sets, reading by reading.
As part of Fluke Connect(®) -- a system of wireless test tools that communicate via the Fluke Connect(®) app, or Fluke Connect Assets software, a cloud-based solution that gathers measurements to provide a comprehensive view of critical equipment status -- the 120B Series can automatically record waveform data to the Fluke Connect app on smartphones or tablets ensuring accuracy and eliminating manual recording of data. Those measurements are then wirelessly uploaded to the cloud and can be combined with measurement data from multiple Fluke Connect test tools to create and share reports from the job site via email and collaborate in real time with other colleagues, increasing productivity in the field.* Storing then comparing and contrasting waveforms of specific asset test points over time enables maintenance engineers to better identify and troubleshoot conditions that can lead to failures.
The wireless 120B Series also allows technicians to place the meter in locations that are difficult to access or are potentially hazardous, then take measurements from a safe distance.
For more information on the Fluke ScopeMeter(®) 120B Series Industrial Handheld Oscilloscope, visit: http://www.fluke.com/120b.
For information on Fluke tools and applications, or to find the location of your nearest distributor, contact Fluke Corporation, P.O. Box 9090, Everett, WA USA 98206, call (800) 44-FLUKE (800-443-5853), fax (425) 446-5116, e-mail fluke-info@fluke.com or visit the Fluke Web site at http://www.fluke.com.
About Fluke
Founded in 1948, Fluke Corporation is the world leader in compact, professional electronic test tools. Fluke customers are technicians, engineers, electricians, and metrologists who install, troubleshoot and manage industrial, electrical and electronic equipment and calibration processes.
Fluke is a registered trademark of Fluke Corporation. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. For more information, visit the Fluke website.
* Within your provider's wireless service area and subject to your plan's pricing and other terms. Fluke Connect is not available in all countries. Some Fluke Connect features require a subscription subject to payment terms and may not be available in all countries.
For more information:
Dan Wright
Communications Manager
(425) 446-5638
dan.wright@fluke.com
https://photos.prnewswire.com/prnvar/20120130/SF43337LOGO-b
Photo - http://photos.prnewswire.com/prnh/20160210/331911
Logo - http://photos.prnewswire.com/prn/20120130/SF43337LOGO-b
SOURCE Fluke Corp.
Photo:https://photos.prnewswire.com/prnh/20160210/331911
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20120130/SF43337LOGO-b
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20160210/331911
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20120130/SF43337LOGO-b
http://photoarchive.ap.org/
Fluke Corp.
Web Site: http://www.fluke.com