New Next Generation 6U VME i7 Processor Board
Poster: SySAdmin
Posted on February 24, 2016 at 12:21:01 PM
New Next Generation 6U VME i7 Processor Board
Acromag's new 6U VME 4th generation Intel® Core(TM) single board computer features a FPGA-based VME to PCIe-bridge that will extend the life of your VME system
WIXOM, Mich., Feb. 24, 2016 /PRNewswire/ -- Acromag's XVME-6510 is a high-performance 6U VME single board computer based on the 4(th) Generation Intel® Core(TM) i7 processor and utilizes the Intel 8-Series QM87 PCH chipset for extensive I/O support. Two ruggedized SODIMMs offer up to 16GB of high-speed DDR3L removable memory plus 32GB of flash memory. The air-cooled XVME-6510 features dual PMC/XMC sites, DVI-D display, and programmable CPU power limits for heat sensitive applications. Expansion capabilities for further customization is available. VxWorks® and Linux® software support, ROHS compliance and extended temperature options are available. A variety of model configurations start at $6,400.
https://photos.prnewswire.com/prnvar/20160224/336942
"The XVME-6510 product family is an excellent choice for new or tech refresh VME-based applications. Not only does it properly resolve the obsolescence of the TSI-148 VME interface chip, it provides the customer with an up-to-date product for at least another 7 years," stated Russell Nieves, Acromag's Director of Embedded sales. "The 2-year standard warranty and long term availability with managed life cycles ensures long-term success for your projects."
The XVME-6510 is a CPU module that uses an Intel® 4(th) Generation Core(TM) i7 processor (Haswell) and the 6U VME64X VMEbus form factor. The board can support either one or two DDR3L ECC SODIMMs, for a total of up to 16GB. The SODIMMs are firmly attached to the module with screws and are surrounded by heat sink material to provide a mechanically and thermally robust mounting mechanism. Extended temperature models are available for operating in a -40°C to +75°C range. The two PMC/XMC sites can be used in any combination. An optional P0 connector allows two Gigabit Ethernet connections. Forego one PMC/XMC module and add the optional XBRD-9060 I/O expander module and increase I/O on the front panel and add two SSD mSATA drives.
About Acromag
Founded in 1957, Acromag, Inc. designs and manufactures hi-tech industrial electronics. They are an international corporation headquartered near Detroit, Michigan. Acromag is focused on developing embedded computing solutions that provide the best long term value in the industry.
http://www.acromag.com
All trademarks are the property of their respective owners.
Photo - http://photos.prnewswire.com/prnh/20160224/336942
SOURCE Acromag
Photo:https://photos.prnewswire.com/prnh/20160224/336942
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20160224/336942
http://photoarchive.ap.org/
Acromag
CONTACT: Karen Haldenwanger, Marketing Manager, Acromag, Inc., Phone: 248-295-0866, khaldenwanger@acromag.com
Web Site: http://www.acromag.com
Acromag's new 6U VME 4th generation Intel® Core(TM) single board computer features a FPGA-based VME to PCIe-bridge that will extend the life of your VME system
WIXOM, Mich., Feb. 24, 2016 /PRNewswire/ -- Acromag's XVME-6510 is a high-performance 6U VME single board computer based on the 4(th) Generation Intel® Core(TM) i7 processor and utilizes the Intel 8-Series QM87 PCH chipset for extensive I/O support. Two ruggedized SODIMMs offer up to 16GB of high-speed DDR3L removable memory plus 32GB of flash memory. The air-cooled XVME-6510 features dual PMC/XMC sites, DVI-D display, and programmable CPU power limits for heat sensitive applications. Expansion capabilities for further customization is available. VxWorks® and Linux® software support, ROHS compliance and extended temperature options are available. A variety of model configurations start at $6,400.
https://photos.prnewswire.com/prnvar/20160224/336942
"The XVME-6510 product family is an excellent choice for new or tech refresh VME-based applications. Not only does it properly resolve the obsolescence of the TSI-148 VME interface chip, it provides the customer with an up-to-date product for at least another 7 years," stated Russell Nieves, Acromag's Director of Embedded sales. "The 2-year standard warranty and long term availability with managed life cycles ensures long-term success for your projects."
The XVME-6510 is a CPU module that uses an Intel® 4(th) Generation Core(TM) i7 processor (Haswell) and the 6U VME64X VMEbus form factor. The board can support either one or two DDR3L ECC SODIMMs, for a total of up to 16GB. The SODIMMs are firmly attached to the module with screws and are surrounded by heat sink material to provide a mechanically and thermally robust mounting mechanism. Extended temperature models are available for operating in a -40°C to +75°C range. The two PMC/XMC sites can be used in any combination. An optional P0 connector allows two Gigabit Ethernet connections. Forego one PMC/XMC module and add the optional XBRD-9060 I/O expander module and increase I/O on the front panel and add two SSD mSATA drives.
About Acromag
Founded in 1957, Acromag, Inc. designs and manufactures hi-tech industrial electronics. They are an international corporation headquartered near Detroit, Michigan. Acromag is focused on developing embedded computing solutions that provide the best long term value in the industry.
http://www.acromag.com
All trademarks are the property of their respective owners.
Photo - http://photos.prnewswire.com/prnh/20160224/336942
SOURCE Acromag
Photo:https://photos.prnewswire.com/prnh/20160224/336942
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20160224/336942
http://photoarchive.ap.org/
Acromag
CONTACT: Karen Haldenwanger, Marketing Manager, Acromag, Inc., Phone: 248-295-0866, khaldenwanger@acromag.com
Web Site: http://www.acromag.com