Page All:
Page 1
Microsemi Announces Power-Over-Ethernet Multiplexer Offering Compact, Cost-Effective Solution for 2.5 Gbps Device Installations
As Only Device of Its Kind on the Market, New Product Enables Upgrade to 802.11ac Wave II 2.5 Gbps While Keeping 1 Gbps Switch
ALISO VIEJO, Calif., Sept. 7, 2016 /PRNewswire/ -- Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced the availability of its PDS-EM-8100 Power-over-Ethernet (PoE) 2.5 Gbps Multiplexer. As the first device of its kind, the unique offering enables installations of new 802.11ac access points with 2.5 Gbps rates without the need to replace the Ethernet switch with a 2.5G NBASE-T interface.
http://photos.prnewswire.com/prnvar/20110909/MM66070LOGO
"Our new PoE Multiplexer delivers new capabilities to the market as the first and only product of its kind, enabling a fast, easy and cost-effective upgrade to the newest 2.5 Gbps technology," said Sani Ronen, director of product management for Microsemi's PoE systems. "While the basic 2.5 Gbps copper technology offering uses the existing CAT5E/CAT6 cable for speeds higher than 1G, the need for the switch upgrade was not addressed. Now our new 2.5G Multiplexer enables users to keep the existing 1G switch and get 2.5 Gbps port with no additional time and at a low cost."
Microsemi's new PDS-EM-8100 PoE 2.5 Gbps Multiplexer converts two ports of 1G into a single port with a 2.5G NBASE-T interface and 30 watts (W) IEEE802.3at PoE. The device enables faster adoption of 802.11ac 2.5G by offering a compact, cost-effective and pre-configured solution for 2.5 Gbps product installations such as WLAN access points, small cells and other Internet Protocol (IP) terminal installations.
According to market research firm Dell'Oro Group's April 2016 report titled, "Ethernet Alliance Analyst Hour," there will be approximately 20 million 802.11ac Wave 2 access points in 2018, which will require 2.5G and 5G Ethernet technology. Microsemi's PDS-EM-8100 PoE 2.5 Gbps Multiplexer caters to this growing demand for 802.11ac Wave 2 and 2.5G, offering a simple, fast installation that can deliver up to 30 W of PoE.
As an ideal alternative to using high-end expensive PoE switches, Microsemi's new device caters to the specific needs of the communications market and more specifically, for Wi-Fi 802.11ac technology. It is suitable for fast-growing applications such as enterprise IT, with plug and play/zero configuration needed, and the ability to perform remote software upgrades.
Product Availability
Microsemi's PDS-EM-8100 PoE 2.5 Gbps Multiplexer is available now for $399. For more information, http://www.microsemi.com/products/poe-systems/new-products or contact sales.support@microsemi.com.
About Microsemi's Outdoor and Industrial PoE Portfolio
Microsemi's PoE portfolio includes the PDS-104GO outdoor PoE switch enabling the connection of four powered devices to a network, stand-alone one-port outdoor PoE midspans supporting up to 60 W with AC and DC input power options, the PD-9002GHO two-port hub, the PDS-102GO three-port managed outdoor PoE switch, the PD-OUT/SP11 PoE Gigabit surge protector and the PD-9501GI and PD-9001GI industrial one-port PoE midspans. Microsemi also provides PoE power devices (PDs) and ideal diode bridges that can be used in outdoor installations. More information on the company's wide variety of Ethernet and PoE solutions can be found at http://www.microsemi.com/products/ethernet-solutions/ethernet-and-poe-solutions.
About Microsemi
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for aerospace & defense, communications, data center and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, California, and has approximately 4,800 employees globally. Learn more at http://www.microsemi.com.
Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.
"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements related to the availability of its PDS-EM-8100 Power-over-Ethernet (PoE) 2.5 Gbps Multiplexer, and its potential effects on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.
Logo - http://photos.prnewswire.com/prnh/20110909/MM66070LOGO
SOURCE Microsemi Corporation
Photo:http://photos.prnewswire.com/prnh/20110909/MM66070LOGO
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20110909/MM66070LOGO
http://photoarchive.ap.org/
Microsemi Corporation
CONTACT: EDITORIAL CONTACTS: Farhad Mafie, VP Worldwide Product Marketing, 949-356-2399, Beth P. Quezada, Director, Corporate Communications, 949-380-6102, press@microsemi.com
Web Site: http://www.microsemi.com
Microsemi Announces Power-Over-Ethernet Multiplexer Offering Compact, Cost-Effective Solution for 2.5 Gbps Device Installations
As Only Device of Its Kind on the Market, New Product Enables Upgrade to 802.11ac Wave II 2.5 Gbps While Keeping 1 Gbps Switch
ALISO VIEJO, Calif., Sept. 7, 2016 /PRNewswire/ -- Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced the availability of its PDS-EM-8100 Power-over-Ethernet (PoE) 2.5 Gbps Multiplexer. As the first device of its kind, the unique offering enables installations of new 802.11ac access points with 2.5 Gbps rates without the need to replace the Ethernet switch with a 2.5G NBASE-T interface.
http://photos.prnewswire.com/prnvar/20110909/MM66070LOGO
"Our new PoE Multiplexer delivers new capabilities to the market as the first and only product of its kind, enabling a fast, easy and cost-effective upgrade to the newest 2.5 Gbps technology," said Sani Ronen, director of product management for Microsemi's PoE systems. "While the basic 2.5 Gbps copper technology offering uses the existing CAT5E/CAT6 cable for speeds higher than 1G, the need for the switch upgrade was not addressed. Now our new 2.5G Multiplexer enables users to keep the existing 1G switch and get 2.5 Gbps port with no additional time and at a low cost."
Microsemi's new PDS-EM-8100 PoE 2.5 Gbps Multiplexer converts two ports of 1G into a single port with a 2.5G NBASE-T interface and 30 watts (W) IEEE802.3at PoE. The device enables faster adoption of 802.11ac 2.5G by offering a compact, cost-effective and pre-configured solution for 2.5 Gbps product installations such as WLAN access points, small cells and other Internet Protocol (IP) terminal installations.
According to market research firm Dell'Oro Group's April 2016 report titled, "Ethernet Alliance Analyst Hour," there will be approximately 20 million 802.11ac Wave 2 access points in 2018, which will require 2.5G and 5G Ethernet technology. Microsemi's PDS-EM-8100 PoE 2.5 Gbps Multiplexer caters to this growing demand for 802.11ac Wave 2 and 2.5G, offering a simple, fast installation that can deliver up to 30 W of PoE.
As an ideal alternative to using high-end expensive PoE switches, Microsemi's new device caters to the specific needs of the communications market and more specifically, for Wi-Fi 802.11ac technology. It is suitable for fast-growing applications such as enterprise IT, with plug and play/zero configuration needed, and the ability to perform remote software upgrades.
Product Availability
Microsemi's PDS-EM-8100 PoE 2.5 Gbps Multiplexer is available now for $399. For more information, http://www.microsemi.com/products/poe-systems/new-products or contact sales.support@microsemi.com.
About Microsemi's Outdoor and Industrial PoE Portfolio
Microsemi's PoE portfolio includes the PDS-104GO outdoor PoE switch enabling the connection of four powered devices to a network, stand-alone one-port outdoor PoE midspans supporting up to 60 W with AC and DC input power options, the PD-9002GHO two-port hub, the PDS-102GO three-port managed outdoor PoE switch, the PD-OUT/SP11 PoE Gigabit surge protector and the PD-9501GI and PD-9001GI industrial one-port PoE midspans. Microsemi also provides PoE power devices (PDs) and ideal diode bridges that can be used in outdoor installations. More information on the company's wide variety of Ethernet and PoE solutions can be found at http://www.microsemi.com/products/ethernet-solutions/ethernet-and-poe-solutions.
About Microsemi
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for aerospace & defense, communications, data center and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, California, and has approximately 4,800 employees globally. Learn more at http://www.microsemi.com.
Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.
"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements related to the availability of its PDS-EM-8100 Power-over-Ethernet (PoE) 2.5 Gbps Multiplexer, and its potential effects on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.
Logo - http://photos.prnewswire.com/prnh/20110909/MM66070LOGO
SOURCE Microsemi Corporation
Photo:http://photos.prnewswire.com/prnh/20110909/MM66070LOGO
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20110909/MM66070LOGO
http://photoarchive.ap.org/
Microsemi Corporation
CONTACT: EDITORIAL CONTACTS: Farhad Mafie, VP Worldwide Product Marketing, 949-356-2399, Beth P. Quezada, Director, Corporate Communications, 949-380-6102, press@microsemi.com
Web Site: http://www.microsemi.com