National Instruments Advances IEEE 802.11n Wireless LAN Test with WLAN Measurement Suite 2.0
Poster: SySAdmin
Posted on May 24, 2010 at 9:07:01 AM
National Instruments Advances IEEE 802.11n Wireless LAN Test with WLAN Measurement Suite 2.0
Enhanced WLAN Software Toolkits and Multichannel RF Instruments Improve on Industry-Best Test Speed and Accuracy
AUSTIN, Texas, May 24, 2010 -- National Instruments (NASDAQ:NATI) today introduced its new solution for IEEE 802.11n wireless LAN (WLAN) testing, the NI WLAN Measurement Suite 2.0, which includes enhanced software toolkits for IEEE 802.11n WLAN signal generation and analysis. The suite integrates with NI 6.6 GHz PXI Express multichannel RF signal generators and analyzers to deliver true, phase-coherent multiple-input, multiple-output (MIMO) RF measurements required for IEEE 802.11n WLAN testing. The suite also delivers the industry's fastest measurement speed for those including error vector magnitude (EVM) and spectrum mask and provides the highest class of measurement accuracy for IEEE 802.11n and a/b/g WLAN test.
Using a software-defined architecture based on PXI and NI LabVIEW graphical system development software, engineers can significantly lower their cost of test and reduce the size of their test systems by testing multiple wireless standards, such as IEEE 802.11a/b/g/n, GPS, Bluetooth, GSM/EDGE, WCDMA, WiMAX and others, using the same PXI test system.
The WLAN Measurement Suite 2.0 adds IEEE 802.11n support to the generation and analysis toolkits to facilitate MIMO testing with true port-to-port phase coherency. For measurements, the toolkit integrates with NI PXIe-5663E 6.6 GHz two-, three- and four-channel vector signal analyzers (VSAs) to provide engineers highly accurate multistream MIMO measurements. For signal generation, the toolkit integrates with NI-PXIe-5673E 6.6 GHz two-, three- and four-channel vector signal generators (VSGs) to generate true phase-coherent, multistream RF signals.
In addition to 802.11n MIMO support, the latest version of the NI WLAN Measurement Suite improves on the previous version with faster measurement time. When combined with the latest NI PXIe-8133 quad-core embedded controller, the system can perform composite EVM and power measurements in 7.0 ms, the fastest in the industry. A result of the toolkit's multicore-enabled measurement algorithms, the fast measurement speed is crucial for reducing test times and lowering the costs of testing wireless devices.
The new NI WLAN Measurement Suite also adds a variety of software features to improve measurement performance and ease of use. Engineers can software-enable its new resolution bandwidth filter feature to remove broadband noise and increase EVM measurement accuracy. With front-end filtering engaged, engineers can achieve residual EVM accuracy of better than -47 dB when testing WLAN devices.
The measurement suite includes soft front panels for signal generation and analysis to support a wide range of WLAN IEEE 802.11n configurations, including 4x4 MIMO, and to report measurement results and traces. Additionally, engineers can use the measurement suite as either a standalone executable or as an API in LabVIEW, NI LabWindows(TM)/CVI ANSI C development environment or in other C, C++ and .NET development systems.
To learn more about the NI WLAN Measurement Suite 2.0, readers can visit http://www.ni.com/wlan.
About National Instruments
National Instruments (http://www.ni.com) is transforming the way engineers and scientists design, prototype and deploy systems for measurement, automation and embedded applications. NI empowers customers with off-the-shelf software such as NI LabVIEW and modular cost-effective hardware, and sells to a broad base of more than 30,000 different companies worldwide, with no one customer representing more than 3 percent of revenue and no one industry representing more than 15 percent of revenue. Headquartered in Austin, Texas, NI has more than 5,000 employees and direct operations in more than 40 countries. For the past 11 years, FORTUNE magazine has named NI one of the 100 best companies to work for in America. Readers can obtain investment information from the company's investor relations department by calling (512) 683-5090, e-mailing nati@ni.com or visiting http://www.ni.com/nati.
Pricing and Contact Information
NI WLAN Measurement Suite 11500 N Mopac Expwy, Austin, Texas
for IEEE 802.11a/b/g/n 78759-3504
Priced* from $5,999; euro
5,499; 840,000 yen Tel: (800) 258-7022, Fax: (512) 683-9300
NI WLAN Generation Toolkit
for IEEE 802.11a/b/g/n E-mail: info@ni.com
Priced* from $3,999; euro
3,699; 560,000 yen
NI WLAN Analysis Toolkit for
IEEE 802.11a/b/g/n
Priced* from $3,999; euro
3,699; 560,000 yen
Web: http://www.ni.com/wlan
*All prices are subject to
change without notice.
CVI, LabVIEW, National Instruments, NI and ni.com are trademarks of National Instruments. The mark LabWindows is used under license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Other product and company names listed are trademarks or trade names of their respective companies.
Editor Contact: Hilary Marchbanks, (512) 683-5937
Reader Contact: Ernest Martinez, (800) 258-7022
Photo: http://www.newscom.com/cgi-bin/prnh/20080723/LAW030LOGO
AP Archive: http://photoarchive.ap.org/
PRN Photo Desk, photodesk@prnewswire.com
Source: National Instruments
CONTACT: Editors, Hilary Marchbanks, +1-512-683-5937, or Readers, Ernest
Martinez, 1-800-258-7022, both of National Instruments
Web Site: http://www.ni.com/
Enhanced WLAN Software Toolkits and Multichannel RF Instruments Improve on Industry-Best Test Speed and Accuracy
AUSTIN, Texas, May 24, 2010 -- National Instruments (NASDAQ:NATI) today introduced its new solution for IEEE 802.11n wireless LAN (WLAN) testing, the NI WLAN Measurement Suite 2.0, which includes enhanced software toolkits for IEEE 802.11n WLAN signal generation and analysis. The suite integrates with NI 6.6 GHz PXI Express multichannel RF signal generators and analyzers to deliver true, phase-coherent multiple-input, multiple-output (MIMO) RF measurements required for IEEE 802.11n WLAN testing. The suite also delivers the industry's fastest measurement speed for those including error vector magnitude (EVM) and spectrum mask and provides the highest class of measurement accuracy for IEEE 802.11n and a/b/g WLAN test.
Using a software-defined architecture based on PXI and NI LabVIEW graphical system development software, engineers can significantly lower their cost of test and reduce the size of their test systems by testing multiple wireless standards, such as IEEE 802.11a/b/g/n, GPS, Bluetooth, GSM/EDGE, WCDMA, WiMAX and others, using the same PXI test system.
The WLAN Measurement Suite 2.0 adds IEEE 802.11n support to the generation and analysis toolkits to facilitate MIMO testing with true port-to-port phase coherency. For measurements, the toolkit integrates with NI PXIe-5663E 6.6 GHz two-, three- and four-channel vector signal analyzers (VSAs) to provide engineers highly accurate multistream MIMO measurements. For signal generation, the toolkit integrates with NI-PXIe-5673E 6.6 GHz two-, three- and four-channel vector signal generators (VSGs) to generate true phase-coherent, multistream RF signals.
In addition to 802.11n MIMO support, the latest version of the NI WLAN Measurement Suite improves on the previous version with faster measurement time. When combined with the latest NI PXIe-8133 quad-core embedded controller, the system can perform composite EVM and power measurements in 7.0 ms, the fastest in the industry. A result of the toolkit's multicore-enabled measurement algorithms, the fast measurement speed is crucial for reducing test times and lowering the costs of testing wireless devices.
The new NI WLAN Measurement Suite also adds a variety of software features to improve measurement performance and ease of use. Engineers can software-enable its new resolution bandwidth filter feature to remove broadband noise and increase EVM measurement accuracy. With front-end filtering engaged, engineers can achieve residual EVM accuracy of better than -47 dB when testing WLAN devices.
The measurement suite includes soft front panels for signal generation and analysis to support a wide range of WLAN IEEE 802.11n configurations, including 4x4 MIMO, and to report measurement results and traces. Additionally, engineers can use the measurement suite as either a standalone executable or as an API in LabVIEW, NI LabWindows(TM)/CVI ANSI C development environment or in other C, C++ and .NET development systems.
To learn more about the NI WLAN Measurement Suite 2.0, readers can visit http://www.ni.com/wlan.
About National Instruments
National Instruments (http://www.ni.com) is transforming the way engineers and scientists design, prototype and deploy systems for measurement, automation and embedded applications. NI empowers customers with off-the-shelf software such as NI LabVIEW and modular cost-effective hardware, and sells to a broad base of more than 30,000 different companies worldwide, with no one customer representing more than 3 percent of revenue and no one industry representing more than 15 percent of revenue. Headquartered in Austin, Texas, NI has more than 5,000 employees and direct operations in more than 40 countries. For the past 11 years, FORTUNE magazine has named NI one of the 100 best companies to work for in America. Readers can obtain investment information from the company's investor relations department by calling (512) 683-5090, e-mailing nati@ni.com or visiting http://www.ni.com/nati.
Pricing and Contact Information
NI WLAN Measurement Suite 11500 N Mopac Expwy, Austin, Texas
for IEEE 802.11a/b/g/n 78759-3504
Priced* from $5,999; euro
5,499; 840,000 yen Tel: (800) 258-7022, Fax: (512) 683-9300
NI WLAN Generation Toolkit
for IEEE 802.11a/b/g/n E-mail: info@ni.com
Priced* from $3,999; euro
3,699; 560,000 yen
NI WLAN Analysis Toolkit for
IEEE 802.11a/b/g/n
Priced* from $3,999; euro
3,699; 560,000 yen
Web: http://www.ni.com/wlan
*All prices are subject to
change without notice.
CVI, LabVIEW, National Instruments, NI and ni.com are trademarks of National Instruments. The mark LabWindows is used under license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Other product and company names listed are trademarks or trade names of their respective companies.
Editor Contact: Hilary Marchbanks, (512) 683-5937
Reader Contact: Ernest Martinez, (800) 258-7022
Photo: http://www.newscom.com/cgi-bin/prnh/20080723/LAW030LOGO
AP Archive: http://photoarchive.ap.org/
PRN Photo Desk, photodesk@prnewswire.com
Source: National Instruments
CONTACT: Editors, Hilary Marchbanks, +1-512-683-5937, or Readers, Ernest
Martinez, 1-800-258-7022, both of National Instruments
Web Site: http://www.ni.com/